Category Archives: Blogs

Ghost (september 2)

Quote

Posted on by

Today seemed to be like any other day. Mike and I arrived and walked into the chamber of sound. I started with resupplying some business cards, picking up garbage, answering questions, not much new. I grabbed the drills and began to open up crates in search of some extra cellulose, some how it keeps disappearing. I have noticed people MUST touch the wall sections, I don’t blame them. I found the cellulose and as soon as I pulled it out of the crate I was approached by a man. He wore small round glasses and a black leather beret. The man had an haggard beard with twisted once-upon-a-time blond hair. The lines on his face told the story of time. He began casual enough asking a few questions about the house nothing out of the ordinary but soon the story began to play out. He described his life, things he had seen and I was genuinely interested. Claiming to be a professor at Berkeley he told stories of technology, music, and chemistry. The details and descriptions where dense but from my point of view deceptive. Soon this was no ordinary encounter and two and a half hours passed. Ultimately the conversation ended and I asked for his name, he asked, “Does it matter?” I said “No” as I stepped away. I still don’t know how I feel about the encounter but one thing is for sure, I wont forget it, and maybe this was the point.

8-30-11 A Small Space is a Small Space

Quote

Posted on by

A Small Space is a Small Space

Today was a relatively calm day at the fair. It was pretty much overcast all day and as I boarded the bus at the MN department of education I thought perhaps it won’t be so crazy. Yet the overcast weather didn’t seem to stop the crows at all. Of course there probably was a smaller amount of people at the fair, but as soon as they try to fit in the 600 SF passive house it always seems like a lot. I guess I’ll look forward to a consitent work load until the fair starts.

Notable People

A couple of notable people talked with me today, and besides the kid that seemed to be imitating barn animals, I think its worth  mentioning. For the most part I’ve been very impressed with the people I’ve talked to. Not too many of them are against the work we are doing, or write it off right away with out even thinking about it. In fact most people already have some knowledge about a particular system or window or idea already and really get engaged talking about it. What follows is a small selection of people.

Remodel Guy

A middle aged guy pulled me aside and after confirming that I was part of the project said he needed to replace the siding on his house and asked what he could do at the same time to make his own perform better. We talked for a while about what his options might be, how taking the opportunity was a good idea, and, what surprised me, we talked most about the specific details of how these solutions should be constructed. This wouldn’t of surprised me. I didn’t come off as some one who was going to do the remodel himself, rather as someone concerned about how the remodel would be done. After our conversation he was very excited and rushed off with a manner that might of convinced me that we was going to start the project as soon as he got home.

Idea Guy

This Guy hung around the passive house for a while and I kept running into him in different locations and parts of the structure. As was a bit older, had a pretty pronounced beard and above all a lot of ideas. He didn’t put them forward right away, he was very open to listening to what I had to say, and he was patient in his questioning. After we would talk for a little bit about some aspect of the building he would always pause for a second with his finger over his month, apparently in deep thought, and then point at what ever we were talking about and suggest an idea. Many of his ideas related to thermal massing or each structures and most of the time he would question me in a manner that left little room for a contradiction. I rather enjoyed listening to his idea and I’m sure he has been thinking about these things for a while.

Undercover Guy

As Ty and myself were talking casually on the east side of the building a man asked us if we were part of the project, we said yes, and he slowly worked his way up to a question I’m sure both Ty and I we surprised by. “what is the fire rating of your walls”. In the moment our only response was what ever code is. We were both a bit worried that the guy would get on our case about not knowing it or something, but he actually smiled and started talking about the importance of his question especially when new materials are being used. He was particularly interested in the foam and we talked for a bit about it. After our conversation he said he really enjoyed the project and then admitted that we was a building inspector. He was very enjoyable to talk to though and instead trying to put down the new construction methods he really wanted to know more about it and figure it out. This was perhaps my favorite conversation of the day.

Day 18

Quote

Posted on by

Day 18 – I started today by working on the redwood flooring on the south side of the building.  By using the speed square/skill saw technique I was able to clean up all the red wood edges quickly.  Lyle and I then proceeded to work on the installation of the decking.  At first I thought Lyle’s method was insane and slow, but so often do I eat my words.  It ended up saving a lot material that we could use later on other potential parts of the house.

The kneepads I found oddly in my car work out great for this type of job.  I was able slide around and work productively.  With the knee pads one could do epic power slides around the building.

Goal: All work and no play makes Jack a dull boy, have a bit of fun from time to time

Day 17

Quote

Posted on by

Day 17

Siding is FINISHED!!!!  We were able to finish the exterior siding today.  First Melissa and I worked on the North side finishing the small amount on the west corner.  Then Dusty Nic and I powered through the East side.

I was the cut man using a speed square and skill saw to make straight edges.  Chris A taught us this cool trick.  Dusty was the left measurer and Nic would draw the angle for the peel away.  I was really proud of how our crew hammered out this late night project.

Goal: Develop your own systems

Days 13-14

Quote

Posted on by

Days 13 – 14

The interior siding has been a ton of fun.  First we got to drive out to a cabinet shop to use a time saver.  We did the work that the sanders took 3 days to do in about 3 hours.  I probably in hailed a little too much sawdust.  Otherwise the siding went fast.

For this job we had to use a fair amount of ladders to reach the higher sections.  The only tools we needed were a chop saw, tape measure, pencil, finish nail gun and from time to time a little steel persuasion (Hammer).

Goal: Know what you are supposed to do instead of being told what to do

Day 11-12

Quote

Posted on by

Days 11 – 12 the South siding went great, we were really productive and praised at the results.  Now the West side did not go so well.  Yes, it started well and dandy with Luke, Dusty and myself.  We were able to plan how we wanted it to work and ended up making a cool detail we call the zipper on the NW side of the building.

As we continued up the wall we ran into a problem.  The crew got larger and new ideas were applied then misapplied then applied.  In other words we needed to slow down and figure out the next plan of attack instead of making it up as we go.

In other news my tool belt sort of exploded.  As it turns out the placement of the crowbar slowly tore away at the securing straps.  Lucky for me I have been doing a lot of siding and finish work were all we really need is a tape measure, pencil, speed square (optional) and a finish nail gun.

When everything was said and done the West wall looked great and I am glad people do not have to see the small amounts of frustration that went into it.

Goal: Try and keep the same crew through the duration of a job

THE ROOF

Quote

Posted on by

Day 10 – The ROOF. . . . It was disgusting how much I sweated on top of the roof doing the sheeting.  I think it was the combination of the south side, inside another building with ceiling ventilators and my questionable fear of edges.

Having water that was the key to working on the roof.  Also Chris and I jerry rigged a way to keep our drivers from falling on our classmates.  We used handle straps that are located on our tool belts to attach the drivers to our self.

Goal: Drink lots of water when working in high places

Day 9

Quote

Posted on by

Day 9 – Andrew and I have been up on the double scaffolding installing the TJI rafters.  As Andrew says we have to do the harness dance (Insert funny music).  Wearing the harness will slow you down quite a bit, however it will offer a little safety.  If you watch Camera A on Day 9 you can see us doing the YMCA.

For tools the addition of a block of wood helped to form the metal bracketing that we mounted on the LVL.

Goal: Do not fall when high up on scaffolding

Day 6-7

Quote

Posted on by

Day 6 – 7

The common theme on the job site is working yourself out of the job.  We always are joking about it until we cannot work anymore.

I started framing out the west window, once that was complete I was out of the job.  Moving over to interior sheeting allowed me to have days of productive work.  However The use of my tool belt was limited.  On day 7 I didn’t even wear it because I was the cut man.  Personally I have never like the skill saw, I thought it to be imprecise and wild.  After a day and a half on the skill saw, I loved it.  When done right the saw is quick and effective.

Goal: Make sure hearing protection is available if cutting for long amounts of time